Residential Plumber
An 8-step path to installing and repairing home water supply and drainage: pipe materials, PPR welding, pressure testing, odour-free drainage, sanitary fixtures, pumps and water heaters, and fixing leaks and blockages.
Start here
Step 1: Pipe materials, tools and keeping the site clean
One short lesson per step, 10–15 minutes on a phone. No sign-up needed.
Hands-on roadmap
Roadmap
- Step 1Lesson
Pipe materials, tools and keeping the site clean
Telling PPR, uPVC, HDPE and copper apart; common fittings; the tool kit you need and how to protect floors and walls while working.
- Step 2Skill
Cutting and welding PPR, gluing uPVC
PPR welding temperature and time by diameter, how to glue uPVC, and the mistakes that make joints leak after a few months.
Requires: Pipe materials, tools and keeping the site clean
- Step 3Skill
Installing water supply and pressure testing
Running hot and cold supply pipes, fitting main and branch valves, and pressure testing before plastering — and reading the result.
Requires: Cutting and welding PPR, gluing uPVC
- Step 4Skill
Drainage, slope and odour control
Drain pipe slope, traps, vent pipes and anti-odour floor drains; what you must never do with an apartment’s shared stack.
Requires: Cutting and welding PPR, gluing uPVC
- Step 5Skill
Installing sanitary fixtures
Fitting toilets, basins, showers and kitchen taps at the right height; sealing and waterproofing around fixture bases.
Requires: Installing water supply and pressure testing, Drainage, slope and odour control
- Step 6Skill
Pumps, water tanks and water heaters
Choosing and installing booster pumps and roof-tank float switches, connecting water heaters with a safety valve; working safely alongside the electrics.
Requires: Installing sanitary fixtures
- Step 7Project
Fixing common leaks and blockages
Dripping taps, leaking concealed joints, blocked basins, toilets and floor drains: diagnose, repair and sign off, with before/after notes.
Requires: Pumps, water tanks and water heaters
- Fixing a dripping faucet and unclogging a bathroom sink without breaking tilesArticleRead
- Toilet that keeps running: 6 causes and how to repair the cisternArticleRead
- Finding concealed in-wall water leaks without breaking walls: 7 steps to narrow down the leak with the water meter and pressure testingArticleRead
- Step 8Assessment
Technical check, quoting and taking jobs
A quiz on materials, slope and pressure, a timed leak-free pipe-joining exercise, and quoting a sample bathroom.
Requires: Fixing common leaks and blockages
Articles
ArticleHow to Use a Drain Snake (Plumbing Auger) Properly: Choosing the Right Auger and Cable, Feeding and Cranking Technique, Clearing Hair Clogs and Knowing When to StopA drain snake (also called a plumbing auger or drain cable) is one of the first tools an apprentice plumber buys, and one of the most misused. Used well, it clears a hair clog from…
ArticleWeak Toilet Flush? How to Fix a Toilet That Doesn't Flush Completely or Needs Two FlushesThe client's complaint is simple: "The toilet doesn't flush properly." The water runs and the bowl swirls, but paper stays behind, or the waste only half goes and they have to wait…
ArticleHow to Install a Kitchen Sink in a Countertop: Top-Mount and Undermount, Cutting and Sealing the Opening, Fitting the Waste and Trap, and Leak TestingA new kitchen is almost finished. The cabinets are in, the stone or laminate countertop has arrived, and the client wants to start cooking this weekend. The last plumbing job is th…
ArticleWater pump not pumping water: hums but won't start, what to checkWhen a water pump hums but will not start (the shaft stays still), the cause is almost always one of four things: a failed capacitor (the most common), a seized shaft or impeller f…
ArticleHow to Install a Wall-Mounted Shower Mixer: Checking the Wall Outlets, Setting Eccentric Unions, Mounting the Mixer, Slide Rail or Shower Column, and Leak TestingA client has bought a new chrome shower set and wants it fitted this afternoon. Another is renovating a bathroom and asks you to "leave the pipes ready for the shower" before the t…
ArticleHow to Install an Outdoor Garden Tap (Wall Faucet): Choosing the Tap and Location, Teeing Off the Supply, Fixing the Wall-Plate Elbow, Preventing Hose Backflow and Fixing LeaksA townhouse client wants a tap by the front gate to wash motorbikes and the yard. Another wants one on a balcony for her plants, a third on a rooftop garden beside the water tank.…
ArticlePipe size for a 3-storey house: main riser, branches and fixturesA 3-storey house usually takes a 32–40 mm main riser from the rooftop tank (32 mm for 2–3 bathrooms, 40 mm from 4 bathrooms or when many fixtures run at once), 25 mm branches for e…
ArticlePPR pipe PN10 vs PN16 vs PN20: which to use for hot and cold waterPPR pipes rated PN10, PN16 and PN20 differ in nominal pressure and wall thickness . At the same outside diameter, PN10 has the thinnest wall, holds about 10 bar at 20°C and should…
ArticlePlumber salary in Vietnam: 2026 repair rates and how to find workA plumber's salary in Vietnam in 2026 (reference figures, varying by region) is roughly 7–10 million VND a month for a plumber's mate, 11–17 million for a qualified plumber on a da…
ArticleHow to replace a hot and cold basin tap: remove, connect the hosesThe quickest correct way to replace a hot and cold basin tap (a basin mixer tap) is: close the two angle valves under the basin, disconnect the flexible hoses and the mounting nut…
ArticleToilet leaking at the base: fix the seal without breaking the floorA toilet leaking at the base has three main sources: the supply line and stop valve, the cistern (the bolts joining the tank to the bowl), and the ring seal between the bowl outlet…
ArticleHow to Install a Pressure Reducing Valve (PRV) on a Home Water Supply: Measuring Pressure, Choosing and Positioning the Valve, Setting It and Fixing Common FaultsA client on a lower floor of an apartment block says the taps "explode" when opened, the washing machine hose burst last month, and the water heater's safety valve drips every even…